DUSTHUNTER C200
Техническая информация
-
Dust Measuring Devices Combined dust measuring device Model Name DUSTHUNTER C200 The DUSTHUNTER C200 is a type-approved measuring device which combines the advantages of the measuring principles transmittance and scattered light forward. It is ideal for measurement of very low to high dust concentrations. The automatic self-alignment optimizes the position of the measuring beam and prevents incorrect measurement. An automatic check of zero and reference point as well as a contamination monitoring is integrated in the device.
At a glance
Combination of transmittance and scattered light measurement For very low to high dust concentrations Automatic check of zero and reference point Contamination monitoring and compensation on both sides Automatic self-alignment For medium to large duct diameters Your benefits
Suitable for highly fluctuating dust concentrations Reliable application due to redundant measurement Low maintenance due to self-monitoring function Prepared for the future to monitor decreasing limit values Type-approved according to EN 15267 Fields of application
Emission monitoring of power stations and waste incineration plants Monitoring of filter plants Measurement of dust concentrations in exhaust gas and exhaust air ducts up- and downstream of a filter Note
The exact device specifications and performance data of the product may deviate from the information provided here, and depend on the application in which the product is being used and the relevant customer specifications.
Technical data Measurement principles: Scattered light forward
Transmittance measurementMeasured values: Extinction
Opacity
Relative opacity
Dust concentration (scattered light)
Dust concentration (transmittance)
Scattered light intensity
TransmittancePerformance tested measurands: Extinction, Scattered light intensity Max. number of measurands: 1 Measuring ranges: Extinction: 0 ... 0.045 / 0 ... 2
Opacity: 0 ... 10 % / 0 ... 100 %
Relative opacity: 0 ... 10 % / 0 ... 100 %
Dust concentration (scattered light): 0 ... 5 mg/m3 / 0 ... 200 mg/m³
Dust concentration (transmittance): 0 ... 200 mg/m3 / 0 ... 10,000 mg/m³
Transmittance: 100 ... 90 % / 100 ... 0 %Comment: The transmittance measurement depends on measuring distance and dust properties Process temperature: -40 ... +300 °C Process pressure: With external purge air unit: -50 ... 30 hPa
With control unit MCU-P: -50 ... 2 hPaProcess gas humidity:
non-condensingDuct diameter: 0.5 ... 3 m
2.5 ... 8 mAmbient temperature: Sender/receiver unit, reflector/scattered light receiver, control unit MCU-N: -40 ... +60 °C
MCU-P control unit: -40 ... +45 °C
intake temperatures for purge airConformities: 2000/76/EC
2001/80/EC
27. BImSchV
EN 14181
EN 15267
MCERTS
German Clean Air Regulations
U.S. EPA PS-1 compliant
U.S. EPA PS-11 compliant
Approved for plants requiring approvalElectrical safety: CE Enclosure rating: IP 66 Analog outputs: 3 outputs:
0/2/4 ... 20 mA, 750 Ω
electrically isolated; two additional outputs if using I/O modules (option)Analog inputs: 2 inputs:
0 ... 20 mA
not electrically isolated; two additional inputs if using I/O modules (option)Digital outputs: 5 relay contacts:
48 V, 1 A
floating; for status signalsDigital inputs: 4 floating contacts Interfaces: RS-232 (service interface)
RS-485 (via optional interface module)
Interface module (option)
USB (service interface)Bus protocol: Ethernet TCP/IP (via optional interface module)
MODBUS (via optional interface module)
PROFIBUS DP (via optional interface module)Operation: Via LC-display or software SOPAS ET Device version: Cross-duct version System components: Reflector/scattered light receiver
Sender/receiver unit
MCU control unitTest functions: Automatic self-test (linearity, contamination, drift, aging)
Manual linearity check with reference filter
Contamination limits: at 30% warning, at 40% failureCorrective functions: Automatic self-alignment Options: External purge air unit, I/O module(s), Interface module(s)
Заказать оригинальный Приборы измерения загрязненности DUSTHUNTER C200 – маркировка изделия бренда SICK и с розничной ценой за штуку. Купите DUSTHUNTER C200 по специальной цене оптом или в розницу в компании ДАНЭКС. Специальная цена распространяется на продукцию SICK для наших клиентов.
Купить с доставкой DUSTHUNTER C200 SICK в ДАНЭКС в розницу или оптом можно по телефону, отправить заявку на почту или воспользоваться формой обратной связи на нашем сайте. Доставка по России, Казахстану, Белоруссии и в другие страны СНГ.
Подобрать аналоги для Приборы измерения загрязненности SICK или других брендов и уточнить актуальную цену на DUSTHUNTER C200 вы сможете, написав нам E-mail или позвонив нам по телефону номеру, указанному на каждой странице.
Скачать
- Документация
- Инструкция
- Сертификаты и декларации
- Поиск описания DUSTHUNTER C200 на сайте проиводителя тут
Доставка
Самовывоз
- FCA г. Санкт-Петербург склад Продавца
Транспортной компанией
- Деловые Линии
- СДЭК
Гарания
- Гарантийный срок на поставляемый Товар составляет 12 месяцев с момента получения Товара Покупателем, если иной срок не установлен в паспортах и сертификатах на Товар.